Saturday, October 3, 2015

Quick burials

Here's a tute on burying your threads in your quilt without a self-threading needle.

All you need: one sewing needle and about 30" of thread. Fine threads don't work well. Use a grabby thread. I use glazed cotton hand quilting thread and a long thin needle with a big eye. 

1. Thread the needle with the thread doubled: fold the thread in half and put either the end loop or both cut ends through the eye. 

2. Pull the thread so the loop end hangs longer than the cut ends. 

3. Optional: on the quilt, pull the bobbin thread up to the top and tie it the top thread. You could bury each thread individually, but then you'll have twice as many to do.

4. Insert needle near these thread ends to be buried and come back out an inch or so away. For a smooth end, I bury it just about in the same place where the bobbin thread came up. Also if I direct my needle back toward the line of stitching, it seems less likely to pull out. 

5. Grab thread ends and pull through the loop. As you pull the needle out, keep threads end in the loop. 

6. Cut excess thread ends as needed. Voila!

After you get the hang of this, burying threads is easy and speedy. And you can make thread starts and stops just about disappear.

After composing this, Cindy Needham made a great You Tube video of this technique. So follow the link. Much better than any photos!